2-Channel Analog Power Amplifier, rack ears included (replaces Z300/Z301)

2-Channel Analog Power Amplifier, rack ears included (replaces Z300/Z301)

A2
ELAN A2

Provides enough power to handle the most inefficient freestanding speakers or a whole house full of in-walls.

Whether specifying the A2 in a home theater application or in a distributed audio system, this single rack-height amp provides enough power to handle the most inefficient freestanding speakers or a whole house full of in-walls.

The A2 amplifier will deliver 150 watts per channel into 2-Ohm loads. This high-current, low-impedance design eliminates the need for speaker selector boxes or load protection devices when driving up to three pair of 8-Ohm speakers.

The ultra-high-efficiency toroidal transformer and 40,000uF bulk storage capacitance ensures that peak current demands are always met. This translates into exceptionally tight bass response and improved dynamic headroom.

Buffered loop outputs allow routing of the stereo inputs to an additional power amplifier or surround sound processor without signal loss or degradation.

Three pairs of gold-plated, five-way speaker binding posts make it easy to connect multiple speakers. The remote trigger input mutes the amplifier when the preamp is turned off. Gain pots for each channel are accessible via the front panel.

ELAN A2 Features at a Glance
  • 60 WPC RMS into 8 Ohms
  • 100 WPC RMS into 4 Ohms
  • 150 WPC RMS into 2 Ohms
  • Buffered line level outputs
  • Remote trigger IN / OUT
  • Only 1 rack-space high
  • Rack ears included

ELAN A2 Specifications
General
  • Number of Channels2
  • Watts RMS Per Channel60
Shipping Info
  • Length21.2 (Inches)
  • Width17.3 (Inches)
  • Height5.2 (Inches)
  • Weight17.45 (Lbs)
  • Unit of MeasureEach
  • UPC844039008961
  • Master Pack Qty2
Other Specifications
  • Power Output (RMS) per channel . 150W @ 2 ohms

    . . . . . . . . . . . . . . . . . 100 W @ 4 ohms

    . . . . . . . . . . . . . . . . . . 60W at 8 ohms

    Frequency Response . . . . . 20Hz to 20kHz -.5dB

    Full Power Bandwidth . . . . . . . . 5Hz to 30kHz

    Signal to Noise . . . . . . . >110dB (A-weighted)

    Channel Separation . . . . . . . . >70dB @ 1kHz

    THD . . . . . . . . . . . . . . . . . . . < 0.03%

    Intermodulation Distortion . . . . . . . . .< -90dB

    Voltage Gain (Av) . . 0 to 28, front panel adjustable

    Input Impedance . . . . . . . . . . . . 33k Ohms

    Remote Trigger Input . . . . . . . .5-24V AC / DC

    Trigger Loop Output . . . . . . . +12VDC @ 0.1A

    AC Power Requirements . . . . . . 120VAC, 440W

    Current Draw . . . . . . . . . . . 3.7A @ 120VAC

    Dimensions

    (in.) 17 W x 2-1/4 H x 11 D

    (mm) 432 W x 58 H x 280 D

    Weight. . . . . . . . . . . . . . . . . . . . . . . . . 16 lbs/7.2 kg

    Certifications: ETLĀ® listed, CE

ELAN A2 Warranty

2 Year Limited Warranty