D1650 16-Channel Digital Power AmplifierThe D1650 utilizes Class–T Digital Technology for a low-heat/high-efficiency design that can deliver clean, full-rated power to all 16 channels simultaneously!
The D1650 was designed for multi-room custom audio installations, and is the perfect companion amplifier for ELAN’s 8-Zone A/V Controller—the System12. With 16 channels of amplification, it can power up to 8 stereo zones, 16 monaural zones, or any combination thereof. A and B Stereo Busses allow you to route one set of inputs to other inputs without the use of additional cables. Buffered Loop Output for each channel, make it easy to configure multi-room listening areas in stereo or mono. Rated at 16 x 45WPC into 8 Ohms and 16 x 60WPC into 4 Ohms, the D1650 delivers more than enough power for any distributed audio application.
ELAN’s patent-pending ACE™ technology (Automatic Clip Eliminator™) makes the D1650 virtually clip proof! ACE is a microprocessor-controlled dynamic leveling circuit that eliminates clipping without the typical audio degradation of traditional compressor-based clipping circuits.
Class–T Digital Technology gives the D1650 an 85% efficiency rating—a spec unreachable by traditional Class-A/B amplifiers. Class–T also has a THD + Noise specification of less than 0.04%—a spec unreachable by Class-D amplifiers. This low-heat/high-efficiency design ensures that all 16 channels can deliver their full-rated power at the same time. Even when it’s running all-out, the D1650 remains cool and sounds clean.
The D1650 has a blue Vacuum Florescent Display (VFD) to indicate channels and level settings. Each channel can be individually adjusted via front panel buttons. The ‘lockout feature’ ensures that finely tuned level settings cannot be inadvertently changed.
| Class T digital technology |
| Low heat/high efficiency rating of 85% |
| ACE™ Automatic Clip Eliminator |
| Blue LED display |
| Individual channel level setup via front panel buttons |
| "Lockout" feature fixes level settings |
| Buffered Loop Outputs for ea. channel |
| Trigger In / Out |
| ETL® & C-tick listed, CE approved |
| 16 Channels of digital amplification |
| 60 WPC RMS into 4 Ohms, 45 WPC RMS into 8 Ohms |
| A & B Bus inputs & outputs |
| 8 Paired trigger inputs + "All On" trigger input & trigger loop output |
| Only 3 rack spaces high |
| The ideal companion amplifier to the S12 Multi-Room A/V Controller |
| Power Output (RMS) per Channel |
60W @ 4 Ohm, 45W @ 8 Ohms |
| Frequency Response |
20Hz to 20kHz, +/- 0.3dB into 8 Ohms |
| Full Power Bandwidth |
10Hz to 50kHz |
| Signal-To-Noise |
>102dB (A-weighted) |
| Channel Separation |
>70dB (channel to channel @ 1 kHz) |
| Total Harmonic Distortion |
<.04% |
| Intermodulation Distortion |
<0.1% |
| Input Impedance |
49k Ohms |
| Trigger Inputs |
5 to 24 Volts AC/DC |
| Trigger Loop Output |
+12VDC @ 0.1A |
| AC Power Requirements |
120VAC, 1200W or 240VAC, 1200W |
| Current Draw |
10A @ 120VAC, 5A @ 240VAC |
| D1650 Dimensions (w/feet) |
(in.) 17 W x 5-1/2 H x 17 D, (mm) 432 W x 148 H x 432 D |
| D1651 Dimensions |
(in.) 19 W x 5-1/4 H x 17 D, (mm) 483 W x 134 H x 432 D |
| D1650 Weight |
55 lbs/25 kg |
| D1651 Weight |
56 lbs/25.5 kg |
| ETL® & C-tick listed, CE approved |
